Return to Home Page  
Return to Home Page              
 

Pindrive Knockoff Hub Adapters

Our knockoff adapters are forged and heat treated to provide superior strength, verses castings or bar stock used by others. The adapters are forged 4140, heat treated, machined and then black oxide coated. Adapters fit wheels made by several manufacturers that use 5 pin systems. The 5 lug patterns are 4 1/2 " and 4 3/4" bolt circle. Blank adapters are available for 4 lug and special bolt patterns upon request.

 

ADAPTER: $400/set of four or $150 each.

BLANK ADAPTER: $450/set of four or $150 each.

 

Compatible with: Most wheels that used the 5 pin system, including our Trigo 427, Trigo FIA, Indy and Sebring.

 

 

 

 

 


 

 

3-Ear Spinner for Pindrive Adapters

Our spinners are forged from A6061 and heat treated to T6, to provide a tough finished part. They are made in two ear angles, standard and flat ear, the flat is great on front wheels, since they don’t protrude as far. Our spinners fit out adapters, trigo adapters and most other applications. We also can machine to other thread sizes.

 

 

Standard Ear: $360/set of four or $100 each.
Flat Ear: $380/set of four or $110 each.
Mixed Set: $370/set of four.

 

 

 

 

 


 

 

Hex Nuts

Aluminum satin: $500/set of four or $135 each.
Anodized red-RH or blue-LH: $580/set of four.
Anodized black, gold or clear: $580/set of four or $145 each.

 

 

 

 


 

 

Pin Nuts

Our pin nuts are forged and heat treated. They are 12mm internal hex.


Thread sizes: 7/16”–20 , ½”–20, 12 mm x 1.5 mm and

14 mm x 1.5 mm

 

$120/set of twenty or $ 6.25 each.

 

 

 

 

 

Home | Wheels | Accessories | Gallery | Tech Specs | Purchase | News | Site Map | Contact Us All material contained in this website is copyright Team Three Wheels 1960 - . All rights are reserved.