Return to Home Page  
Return to Home Page              
 

AC-III™

The best looking bolt-on wheel made for Cobra replicas. We make both 1 and 2 piece wheels, the two-piece construction allows the offset to be varied in manufacturing by moving the center forward or backward before final welding. This allows you to order wheels that will position your tires perfectly in the fender wells. The finished wheel is very light-weight. Wheels are available in most five lug bolt patterns.

 

The new 18" AC-III wheel is avaliable in Pin Drive and Bolt-on, Please call for pin-drive backspacings.

 


 

AC-III 1-Piece Wheel Package Special for Factory Five Cobras
'87-'93 track width 4 1/2" PCD
15 x 8 and 15 x 10, cast finish, with knock-offs, lug covers (will clear PBR calipers) $1399

 

 

BUY THESE WHEELS

 

 

 

 

AC-III Specs & Pricing
Wheel Size Photos Front Side Setting
min - max
Back Side Setting
max* - min
Cast
Price Each
Lip finish
15 x 7   3 3/8 to 4 1/2" 4 5/8” to 3 1/2” $439 POL
15 x 8   3 3/4" 5 1/4" $325 POL
15 x 8   3 1/2 to 5 1/2" 5 1/2 to 3 1/2" $449 POL
           
15 x 9   3 1/4 to 4 1/2" 4 3/4 to 3 1/2" $449 POL
15 x 10   4 3/4 to 4 1/2" 6 1/2 to 6 1/4" $325 POL
15 x 10   3 3/8 to 7 1/2" 7 5/8 to 3 1/2" $479 POL
15 x 12   3 1/2 to 9" 9 1/2 to 4" $489 POL
           
17 x 7   3 1/2 to 4 1/2" 4 1/2 to 3 1/2” $489 POL
           
17 x 8   3 1/2 to 5 1/2" 5 1/2 to 3 1/2" $499 POL
17 x 9   3 1/2 to 6 1/2" 6 1/2 to 3 1/2" $509 POL
           
17 x 9 1/2   3 1/2 to 7" 7 to 3 1/2" $509 POL
17 x 10 1/2   5 3/4 to 4 3/4" 6 3/4 to 5 3/4" $425 POL
17 x 10 1/2   4 7/8" 6 5/8" $395 POL
17 x 11   4 to 8 1/2" 8 to 3 1/2" $519 POL
           
18 x 7   3 1/2" to 4 1/4" 4 1/2" to 3 3/4" $529 POL
18 x 8   3 1/2" to 4 1/4" 5 1/2" to 4 3/4" $395 POL
18 x 8   4 1/2" to 4 3/4" 4 1/2"to 3 1/4" $539 POL
18 x 9 1/2   3 " to 7 1/2" 7 1/2" to 3 1/2" $549 POL
18 x10   3 " to 8" 8" to 3 1/2" $559 POL
18 x 11   3 " to 9" 9" to 3 1/2" $579 POL
18 x 12 HP   10"- 5" 3" - 8" $599 POL
18 x 12 LP   9 3/8" - 4 3/8" 3 5/8" - 8 5/8" $599 POL
18 x 13     call $729 POL

 

 

Red, bold wheels are 1-piece cast and in stock.

 

Wheels require purchase ET Mags accessories to complete wheel,

2-piece wheels with large backspacing require special Flange Center machining at $65 each.

 

WHEEL ONLY, WITHOUT ACCESSORY PURCHASE, call for pricing

 

Decorative Knock Off Kit (polished): $320, set of 4.

Lug Nut Cover Kit (cast): $125/set of four.

Hex cap $45.00ea.

 

All wheels have polished lip.

Satin finishing of Lip is $50 each.

 

2 piece wheels are assembled to order with a 1-3 week turnaround. Other sizes can be made, please call to discuss application.

Prices effective June 01, 2020.

 

*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.

 

CALIPER Clearance, these are maximum and may be less depending on wheel backspacing.

17" wheel has .9" max.,

18" wheel has 1.125" for HP

18" wheel has .5" for LP

 

*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.

 

= See wheel on vehicle.    =See photo comparison of wheel in different sizes.

 

 

 

BUY THESE WHEELS

 

 

 

 

Home | Wheels | Accessories | Gallery | Tech Specs | Purchase | News | Site Map | Contact Us All material contained in this website is copyright Team Three Wheels 1960 - . All rights are reserved.